SNMP Config for CUPS

snmp.conf(5)                                                                                   Apple Inc.                                                                                  snmp.conf(5)

NAME
       snmp.conf - snmp configuration file for cups

DESCRIPTION
       The  snmp.conf  file  configures  how  the standard CUPS network backends (http, https, ipp, ipps, lpd, snmp, and socket) access printer information using SNMPv1 and is normally located in the
       /etc/cups directory. Each line in the file can be a configuration directive, a blank line, or a comment. Comment lines start with the # character.

       The Community and DebugLevel directives are used by all backends. The remainder apply only to the SNMP backend (cups-snmp(8)).

DIRECTIVES
       The following directives are understood by the CUPS network backends. Consult the on-line help for detailed descriptions:

       Address @IF(name)

       Address @LOCAL

       Address address
            Sends SNMP broadcast queries to the specified address(es). There is no default for the broadcast address.

       Community name
            Specifies the community name to use. Only a single community name may be specified. The default community name is "public".

       DebugLevel number
            Specifies the logging level from 0 (none) to 3 (everything). Typically only used for debugging (thus the name). The default debug level is 0.

       DeviceURI "regular expression" device-uri [... device-uri]
            Specifies one or more device URIs that should be used for a given make and model string. The regular expression is used to match the detected make and model, and the  device  URI  strings
            must be of the form "scheme://%s[:port]/[path]", where "%s" represents the detected address or hostname. There are no default device URI matching rules.

       HostNameLookups on

       HostNameLookups off
            Specifies whether the addresses of printers should be converted to hostnames or left as numeric IP addresses. The default is "off".

       MaxRunTime seconds
            Specifies the maximum number of seconds that the SNMP backend will scan the network for printers. The default is 120 seconds (2 minutes).

SEE ALSO
       cups-snmp(8),
       http://localhost:631/help

COPYRIGHT
       Copyright 2007-2013 by Apple Inc.

23 April 2012                                                                                     CUPS                                                                                     snmp.conf(5)
 Manual page cups-snmp.conf(5) line 1/51 (END) (press h for help or q to quit)